What is Welded Mesh Fencing?

Welded mesh fencing is made from vertical and horizontal steel wires welded together at every intersection, forming a rigid panel. Unlike chain-link — which is woven and needs tensioning against posts — welded mesh arrives as a self-supporting sheet that simply bolts to a post line.

That rigidity is the whole point. A welded panel does not sag, does not need straining wires, and holds a straight line for the life of the fence. Panels are lightweight, low maintenance, and are used across residential, commercial and industrial sites.

Most profiles feature a rolled top and bottom edge, which adds stiffness to the panel and removes the sharp wire ends at the edges.

Welded mesh Chain-link
Form Rigid panels Rolled fabric
Installation Bolted to posts Tensioned with cables or rails
Appearance Crisp, architectural Utilitarian
Repair Replace a panel Patch or re-tension a section
Follows slopes Stepped or raked panels Follows ground contour readily

Panel profiles

Welded mesh is available in a range of profiles from decorative through to moderate security. The profile determines wire spacing, stiffening pattern and appearance.

  • Garden Mesh — decorative, for domestic settings
  • Wattle — lightweight, suited to parks and temporary fencing
  • Willow Domestic — home and low-security use
  • Willow Commercial — a reinforced version of Willow for commercial areas
  • Banksia — classic flat panel mesh, multi-purpose
  • Boulevard (Acacia) — contemporary profile with optional colours
  • Boulevard Security — enhanced profile with tighter wire spacing

For genuine high-security applications, 358 mesh is the appropriate product rather than any of the profiles above. See the separate 358 Security Fencing article.

Available sizes

  • 900mm H x 2400mm W
  • 1200mm H x 2400mm W
  • 1500mm H x 2400mm W
  • 1800mm H x 2404mm W

Custom heights and widths are available on request.

Finishes and coatings

  • Galvanised (zinc / aluminium coated) — the standard finish. Long lifespan with good corrosion resistance, and the right choice where appearance is secondary
  • Powder coated — a colour finish applied over the galvanised base. Used where the fence needs to blend into a streetscape, park or building facade

Colour and finish options vary by panel profile. Powder coating is common on commercial and government work where visual integration is part of the brief.

Gates and accessories

  • Matching gates, hinged or sliding, in the same profile as the fence line
  • Standard or high-security fixings and brackets
  • Square tube posts sized to the panel height
  • Custom heights and widths on request

Technical standards

  • AS 2423-2002 — coated steel wire fencing products; sets minimum requirements including weld integrity for fencing mesh
  • AS/NZS 4534:2006 — zinc and zinc/aluminium-alloy coatings on steel wire; governs coating mass and quality
  • AS 4506-2005 — thermoset powder coatings, where panels are powder coated
  • AS/NZS 4792:2006 — hot-dip galvanized coatings on ferrous hollow sections, applicable to posts

Together these define the minimum quality, coating thickness and weld integrity expected of fencing mesh supplied in Australia. Ask for compliance documentation on government and infrastructure projects — it is routinely requested at handover.

Installation guidance

  • Use anti-tamper fasteners on any panel that faces a public or unsupervised area — standard bolts on a security line are an obvious weak point
  • Specify powder-coated panels in coastal zones and in areas where visual impact matters
  • Where the fence supports surveillance, keep sightlines clear: mesh is chosen partly because cameras can see through it
  • Set posts plumb and at the correct centres before fixing any panels; welded panels are rigid and will not absorb alignment error
  • On sloping ground, decide early between stepped and raked panels — it changes what you order

Choosing a profile

A rough decision path:

  1. Decorative garden or domestic boundary → Garden Mesh or Willow Domestic
  2. Park, reserve or temporary line → Wattle
  3. General commercial perimeter → Banksia or Willow Commercial
  4. Commercial frontage where appearance matters → Boulevard (Acacia), powder coated
  5. Moderate security with tighter apertures → Boulevard Security
  6. Genuine anti-climb / critical infrastructure → 358 mesh

Common questions

It is more rigid, which is a different property. A welded panel resists deformation and holds its shape; chain-link absorbs impact by flexing. For anti-climb and cut resistance specifically, 358 mesh outperforms both.

What panel sizes are stocked?

900mm, 1200mm, 1500mm and 1800mm heights, at 2400mm wide (2404mm for 1800mm panels).

Can I get welded mesh in a colour?

Yes, via powder coating. Options vary by profile.

Do I need special posts?

Welded mesh uses square tube posts matched to the panel height, with brackets or clamps appropriate to the profile.

What is the difference between Boulevard and Boulevard Security?

Boulevard Security uses tighter wire spacing, making the mesh harder to get a foothold or tool into.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us